Log in

Log in

NRG Workshop: Using the Table Saw Safely Registration Open!

November 19, 2021 11:35 AM | David Eddy

Registration is now open for the next NRG online workshop!  Click here to register or learn more!

Using the Table Saw Safely, presented by Kurt Van Dahm

Saturday, December 11, 2021

The safe use of smaller table saws, like the Byrnes saw, will be the subject of the presentation.  Though smaller than full-sized table saws, model-sized saws can still take a finger off or severely injure the modeler if they are used in an unsafe manner.   

Kurt will show how to perform rip cuts, cross cuts, lap joints, miters and other common operations in a safe and efficient manner.  Many modelers say they are totally intimidated by the dangers of the table saw and that they are hesitant to use the saw they purchased.  After this program, these modelers should be less hesitant to use their saw.   And those modelers who routinely use their saws will appreciate the tips on proper saw set-up.   

At a minimum this presentation will provide a helpful review of safety tips and might even prevent an injury due to complacency.

Plan to attend the next NRG Virtual Workshop on Saturday, December 11, 2021, at 10:00 AM CST entitled "Using the Table Saw Safely".   Presented by NRG Director Kurt Van Dahm.  This is an updated version of Kurt's talk which was presented at the 2018 NRG Conference in Las Vegas.  As usual this event is free to NRG members while others can attend for the bargain price of $5.00.

Click here to register or learn more!


  • Date: Saturday, December 11, 2021 at 10:00am Central
  • Location: Online, attend using your computer or tablet.
  • Registration: Advance registration required.
  • Cost: Free for current NRG members, $5 for non-members
Click here to register or learn more!
Powered by Wild Apricot Membership Software